You are here:Home > Rustic Brush Light
Sort By:
Page of 1
Single Piece of Quick Wood Steel 4" for people buying individual pieces
List Price: $7.50
Our Price: $6.00
Sale Price: $5.00
You save $2.50!

This is for a single piece of Quick Wood Quick Strip Steel brush 4", please remember on check out to add the amount you need. Like if you are filling a 28 segment hub you need the quantity to be 28 on check out.
Rustic tynex brushes comes in sets of 2 pieces as they over lap each other
List Price: $99.00
Our Price: $75.00
Sale Price: $64.00
You save $35.00!

The rustic tynex brushes can be used on any of the spindles on this website. If you are doing a 4" spindle you need 3 sets or 6 pieces of tynex brushes. If you are doing a 6" spindle you need 5 sets of 10 pieces. If you are doing a 12" spindle you need 10 sets of 20 pieces. Remember when you order here you get 1 red and 1 blue rust brush
Steel brushes replacement 4" in length comes as a set of 28 steel brushes
List Price: $246.00
Our Price: $208.00
Sale Price: $140.00
You save $106.00!

This is the replacement set for the 4" wide by 8 3/4" diameter steel brush head. Order your replacement steel brushes here.
Steel brushes replacement for 6" spindle 20 steel brushes in a pack
List Price: $200.00
Our Price: $175.00
Sale Price: $150.00
You save $50.00!

Steel brush replacement set for 6" spindle with steel brushes
Hub and steel brushes 4" in width and 8 3/4" diameter, 28 segment. Made to attach to a drill chuck.
List Price: $350.00
Our Price: $350.00
Sale Price: $246.00
You save $104.00!

This steel head is using 28 segment hubs making the diameter of the head about 8 3/4" and overall sanding width is 4". This rustic steel head will remove softwood and cut groves into the wood in tinny steel brush gauges opening the wood in linier spots down the line of the grain. Again these new heads are made to attach to a portable drill or a drill press.
6" Spindle with 20 Segment hubs and steel brushes overall diameter 8" .
List Price: $350.00
Our Price: $300.00
Sale Price: $279.00
You save $71.00!

The 6" spindle has a 3/4" bore with set screw for attaching it to your motor.
4" Spindle with Tynex brushes Rustic
List Price: $340.00
Our Price: $300.00
Sale Price: $285.00
You save $55.00!

The tynex brushes can be used with any of the QuickWood spindles and heads. They are made for removing soft grain in soft woods, this will make the surface look weathered as the soft grain is removed and the hard grain is left behind. The look it creates are much like a soft sand blasting removing about 1/8 " of the soft wood.
Steel brushes replacement for our 12" wide spindle 20 pieces
List Price: $375.00
Our Price: $340.00
Sale Price: $300.00
You save $75.00!

replacement set for our 12" spindle this pack is 20 steel brushes to fit in the 20 segment hub, over all diameter of the spindle with steel brushes are 8"
4" spindle with steel brushes, spindle has a 3/4" bore with set screw for your motor pin
List Price: $435.00
Our Price: $400.00
Sale Price: $333.00
You save $102.00!

For people that want to build their own rustic sander, we have here a 4" spindle that fit a 3/4" motor pin. Motor rpm speed should be between 500-1000 rpm for rustic sanding with this tool.
12" Spindle with 20 Segment hubs and steel brushes overall diameter 8" .
List Price: $600.00
Our Price: $550.00
Sale Price: $493.00
You save $107.00!

Do it your self 12" spindle with hubs and steel brushes. Hook up your own motor and connect the spindle to the motor and you have a rustic sander. The spindle has a 3/4" bore with set screw for you motor pin. Rustic sanding is done at speeds of 500-1000 rpm
   
 
Specials SAVE 30-70%

Specials SAVE 30-70%