Flap Wheel for Drill - 2" & 4" Wide Brush Sanding Head
The easiest way into brush sanding: a flap wheel head that chucks straight into the 3/8" drill you already own. At about 2.5 lbs it's light enough for overhead and vertical work, and the flexible flaps sand profiles, curves, and details ten times faster and more evenly than hand sanding.
Available in 2" wide for moldings and tight work or 4" wide for doors and panels. Use it for white-wood sanding before stain, and again for sealer sanding between coats. Free ground shipping in the USA.
Which grit should I choose for wood sanding with this flap wheel?
For bare wood before stain, start with a coarser grit to remove saw marks, then step up for a smooth surface. Use finer grits for sealer sanding between finish coats. Both the 2" and 4" widths are available from P60 through P320.
Will this flap wheel fit my drill?
Yes. The head chucks straight into a standard 3/8" drill you already own. At about 2.5 lbs it is light enough for overhead and vertical work.
What is the difference between the 2" and 4" wide options?
The 2" wide wheel suits moldings, tight profiles, and detail work. The 4" wide wheel covers more ground on broad surfaces such as cabinet doors and panels.