You are here:Home > Flap Wheel 2"x10"
Sort By:
Page of 1
2" flap wheel grit p60
2" x10" Flap Wheel Complete p60
List Price: $99.00
Our Price: $85.00
Sale Price: $79.00
You save $20.00!

2" Flap wheel complete with hub and universal flange for any size arbor. 1/4" to 2" arbor size. 28 segment brush/abrasive segments Grit 60.

This style flap wheel is most often used for aggressive sanding jobs on un-finished wood or reclaimed wood where a strong grit needs to be used for removal of imperfections. The advantages to the flap wheels are the ability to contour to any sharp or profile with out altering that sharp or profile. The grit 60 however will be able to alter profiles as its a very course grit.
2" x10" Flap Wheel Complet p80
List Price: $99.00
Our Price: $85.00
Sale Price: $79.00
You save $20.00!

2" Flap wheel complete with hub and universal flange for any size arbor. 1/4" to 2" arbor size. 28 segment brush/abrasive segments Grit 60

This style flap wheel is mostly used for white wood sanding of mouldings and edges on big doors in a stack, the wheel size of 2" works well on mouldings and for un-finished edges. The grit will leave a linier sanding scratch as its a course grit, it will also clean up some knife marks and imperfections. This grit will alter profiles and edges if the operator is not careful in operating the head.
2" x10" Flap Wheel Complete p 100
List Price: $99.00
Our Price: $85.00
Sale Price: $79.00
You save $20.00!

2" Flap wheel complete with hub and universal flange for any size arbor. 1/4" to 2" arbor size. 28 segment brush/abrasive segments Grit 100. The p 100 grit can remove light knife marks on a moulding and break sharp edges on a profile before a finer grit is used and stain and sealer coat is applied. If you want to use this for sanding edges it will also work well for this job.
2" x10" Flap Wheel Complete p 120
List Price: $99.00
Our Price: $85.00
Deal of the Day Price: $70.00
You save $29.00!

2" Flap wheel complete with hub and universal flange for any size arbor. 1/4" to 2" arbor size. 28 segment brush/abrasive segments Grit 120. You can use this head with your own spindle or use it on a QuickWood spindle available on this website. Setting up a flap wheel on your own spindle remember recommended speeds are 300rpm to 800 rpm. If you can setup a speed control on the motor you are using via an Inverter this would be the best setup as you want to change the spindle speed from aggressive to fine sanding.
2" x10" Flap Wheel Complete p 150
List Price: $99.00
Our Price: $85.00
Sale Price: $79.00
You save $20.00!

2" Flap wheel complete with hub and universal flange for any size arbor. 1/4" to 2" arbor size. 28 segment brush/abrasive segments Grit 150.
2" x10" Flap Wheel Complete p 180
List Price: $99.00
Our Price: $85.00
Sale Price: $79.00
You save $20.00!

2" Flap wheel complete with hub and universal flange for any size arbor. 1/4" to 2" arbor size. 28 segment brush/abrasive segments Grit 180. Works wells as a final sanding grit before stain or sealer. The p180 will leave a very fine sanding scratch that should not be visible after the top coat has been applied. Using the p180 as a primer sanding grit is also recommended as the primer normally need a little more abrasive grit when being sanded.
2" x10" Flap Wheel Complete p 240
List Price: $99.00
Our Price: $85.00
Sale Price: $79.00
You save $20.00!

2" Flap wheel complete with hub and universal flange for any size abor. 1/4" to 2" abor size. 28 segment brush/abrasive segments Grit 240. Use this head as your sealer sanding head. Mount in on your own spindle and the fine sand paper will clean up your sealer coat for a smooth finish when top coat is applied. This should be the second flap head that you buy for doing your sealer sanding. If you are doing a second sanding on primer this would also be a good grit to use.
2" x10" Flap Wheel Complete p 320
List Price: $99.00
Our Price: $85.00
Sale Price: $79.00
You save $20.00!

2" Flap wheel complete with hub and universal flange for any size abor. 1/4" to 2" abor size. 28 segment brush/abrasive segments Grit 320. The finish grit we carry for fine sealer sanding on dark stained work pieces, where sanding around edges and delicate cut outs needs a very fine grit to be successful. Using a finer grit also make the job easier for the operator as attention to sanding pressure and sanding time on edges is not as critical because the grit is finer. If you are new to sanding with flap heads on sealer parts this would be  a good starter grit.
   
 
Specials SAVE 30-70%

Specials SAVE 30-70%